ABB Module IMMPI01 ABB IMMPI-01 ABB IMMPI 01 INTERFACE MODULE superior quality product
Product Description:
Temporary interruption of the passive mode While a communication between the DRUCK or EMAS
blocks and a device connected to COM1 is being executed, it may be come necessary to modify the program, for example. For this purpose, you must switch over COM1 from the passive mode into the active mode.Switch-over: Passive mode Active mode There are three possibilities for switching over:
Set the RUN/STOP switch to the "STOP" positionDuring the execution of the PLC program, the system
constant KW 00,06 must not be sent to the PLC because this would cause the system to be switched back to the passive mode. The special command assigns the value of "1" to the image
of the system constant KW 00,06 located in the operand memory. The PLC evaluates the value of this image and sets the application mode of COM1 correspondingly.
Related Product Recommendation:
| 3BSE00638R1 | BSE003528R1 | 3BSE006085R1 | | 3BSE006385R1 | 3BSE003529R1 | 3BSE003827R1 | | 3BSE013243R1 | 3BSE004693R1 | 3BSE003829R1 | | 3BSE013284R1 | 3BHT100018R1 | 3BSE001077R1 | | 3BSE012632R1 | 3BSE003097R1 | 3BUC98002R0001 | | 3BSE001449R1 | 3BSE006802R1 | 3BSE001440R1 | | 3BUR000101R1 | 3BHT100010R1 | 3BHT300003R1 | | 3BUR980023R1 | 3BSE010997R1 | 3BSE000756R1 | | 3BSE002224R1 | 3BHT100010R1 | 3BSE011000R1 | | 3BSE002253R1 | 3BUC910018R1 | 3BSE011002R1 | | 3BSE004447R1 | 3BSE003390R1 | 3BHT300017R1 | | 3BSE003785R1 | 3BSE003389R1 | 3BSE020520R1 | | 3BUR000118R3 | 3BHT300019R1 | 3BSE013202A1 | | 3BSC950030R1 | 3BSC760004R1 | 3BUR980009R1 | | 3BSE003785R1 | 3BSC760009R1 | 3BSE000435R1 | | 3BSC950022R5 | 3BSE003832R1 | 3BSE004773R1 | | 3BSC950004R1 | 3BSE003816R1 | 3BSE055760R1 | | 3BHT300007R1 | 3BSE006096R1 | 3BHT300012R1 | | 3BSC950138R1 | 3BSE001552R1 | 3BHT00006R1 | | 3BSC950130R1 | 3BSC610037R1 | 3BHT300007R1 | | 3BSC950158R1 | 3BSE000863R0001 | 57120001-PS | | 3BSC950251R1 | 3BUR000698R1 | 57120001-DP | | 3BSE008526R1 | 3BUR000699R1 | 57120001-P | | 1SBP260103R1001 | 3BSC550038R3 | 5712001-HA | | 1SBP260101R1001 | 3BSE009616R1 3BSC | 3BSE007949R1 | | GJV3074365R1 | 492898801 | 57120001-HZ | | GJV3074366R1 | TK520V030 | 3BSE014162R1 | |
Product's Character:
For the passive mode of COM1, the interface parameters can be changed using the SINIT function block. If the changed values are not plausible, the COM1 interface uses the default values.The interface is newly initialized each time the operating mode is switched over. The active mode parameters are set in the active mode, whereas in the passive mode the parameters established by the SINIT block or the default values are set. Serial interface COM2 Interface standard: EIA RS-232 Assignment of the serial interface COM2 The serial interface COM2 has the following pin assignment The serial interface COM2 is only suitable for the passive mode. In addition, it can be operated as a MODBUS interface.The passive mode is used to perform a communication configured with the DRUCK and EMAS blocks between the user program and a device connected to the serial interface.
LOT 3 NEW GATES 330H100 POWERGRIP TIMING BELT 33X1IN D220371
LOT 4 NEW GATES ASSORTED A47 210L100 190XL025 190XL BELT D354591
LOT 2 REXNORD 814412 DBZ 62 SB 0.625 HUB 5/8IN COUPLING D230119
LOT 2 NEW TB WOODS SDS SURE-GRIP STEEL QD BUSHING 1-11/16IN BORE D301617
LOT 2 NEW BI TECHNOLOGIES 7246 R2K L.25 POTENTIOMETER RESISTOR D238176
LOT 10 NEW CARLON E978G 1-1/4IN NONMETALLIC TWO HOLE CONDUIT SNAP TRAP B241335
NEW VIRAJ 1 STD 300 LB B16 A/SA182 F316/316L 71932 STAINLESS FLANGED453813
LOT 100 NEW B-LINE ACS-25-125F 1/4X1-1/4IN FLAT HEAD CONCRETE SCREW D482393
NEW CASTOR WHEEL 1-1/4X3-7/8X1-3?/16IN D398510
NEW F&H FOOD EQUIPMENT BPT-684 SANITARY GASKET 3/4 IN THICK D434154
NEW THOMAS&BETTS RC10-38X STA-KON SET OF 50 YELLOW 3/8IN RING TERMINAL D454079
LOT 63 NEW 3/8IN BRASS HOSE TUBE BARBED COUPLER D483892
LOT 8 NEW LIGHTNIN 206 RETAINER RING D474916
NEW SOMEC X22318 BLOCK PLATE STEEL 1-1/2X1-1/2X1/4?IN D290233
NEW LANTECH 40018602 PLASTIC WIPER FLAP CUTTER 32X5IN D384759
LOT 11 NEW VISHAY 150D684X9035A2 CAPACITOR 0.68UF 35V-DC D481601
LOT 4 NEW GATES 5L580 TRUFLEX 3580 58 X 21/32IN V-BELT B368102
The use of the product:
1.auto ancillary.
2..feed industry,
3.aluminum smelting machines,
Product's advantages:
1.Customer service in 1-4 hours. If there's any question, please contact with our sales.
2.open architecture to take advantage of traditional or renewable sources of energy!
3.We keep more than 10 thousands Transistors in warehouse, it could cut lead time of most items.
Our advantages:
1. Experienced technichal support team.
2. new and original
3.1 year warranty
Frequently Asked Questions:
1. Q: Do you provide warranty for the goods?
A: Yes, we provide warranty for all the goods from us.
2. Q: Could Moore provide technology support?
A: We're in this field more than 12 years. If there's any problem, please contact with us,we'll provide suggestion from our engineer to help you solve problem.
3. Q: Does Moore keeps goods in stock or only trading?
A: We have large warehouse for goods. Keep lots of goods in warehouse, so could promise fast delivery.
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Product Tags:
|
|
ABB Module IMMPI01 ABB IMMPI-01 ABB IMMPI 01 INTERFACE MODULE superior quality product Images
|
